News
TruLaser Weld 3000 for Small-Batch Welding
The new robotic laser-welding cell targets changing sheet-metal housings through offline programming, path correction and compact optics. Joint fit-up and fixture clearance remain decisive.
HSG R1 Tube Laser Financing After the Rate Hike
September 2026’s policy-rate increase calls for updated financing terms, not an automatic purchase delay. Evaluate the HSG R1 against recurring small-tube work, demonstrated production benefits, and the selected loading package.
HySpeed Plasma Upgrade vs. HSG GH Fiber Laser
HySpeed’s August 18, 2026 launch adds an upgrade option for compatible Powermax SYNC tables. Evaluate recoverable plasma cycle time against the HSG GH’s cutting platform and optional sheet-handling automation.
PEMA WeldControl Integrates Scan-Based Multi-Pass Programming
A new PEMA WeldControl workflow adapts multi-pass patterns to measured groove geometry. For high-mix buyers, that is a different capability from creating programs or correcting joint location.
HYDMECH V-18-45 for Structural Miter Sawing
The semi-automatic HYDMECH V-18-45 handles straight and two-way miter sawing when structural profiles fit its angle- and configuration-specific work envelope. Compare the actual cut list, optional equipment, and material flow before selecting it.
Which Weldments Gain from Cobot Welding?
Long, continuous seams and limited repositioning are useful first signals when screening weldments for cobotic GMAW. Compare full-cycle results by part family before building a capacity case.
Akyapak 4-Roll Plate Rolls for Heavy Plate Forming
Four-roll plate rolls can help keep heavy plate aligned through pre-bending and rolling. Match the machine’s capacity, supports, geometry, and handling plan to the complete workpiece.
AGT BeamMaster for Structural Beam Welding
The AGT BeamMaster welds pre-fit structural members. Add dual-zone operation and LayoutMaster fitting projections when fitting and welding are both meaningful constraints—and validate the decision against eligible work, fit-up, data, and layout.
Tube Laser Bevel Cutting for Weld Preparation
A 3D tube laser can combine profile cutting and specified bevel preparation on suitable recurring parts. Learn how to check joint requirements, confirm the TS2 V2.0 configuration, and validate sample cuts.
Grain Direction in Laser Nesting for Press-Brake Parts
Restrict laser-nest rotation only when material guidance, bend requirements, finish specifications, or validated forming results make sheet orientation consequential.
COE SpaceMaster Compact Cut-to-Length Line
Announced August 27, 2026, the COE SpaceMaster combines coil payoff, straightening, servo feeding, shearing, and blank stacking for small and mid-sized fabricators and product OEMs evaluating in-house blank production.
Can the Prodevco PCR42 Run Existing NC1 Files?
The Prodevco PCR42 is specified to accept DSTV/NC1 files from detailing software such as Tekla and SDS2. That may allow a shop to retain its detailing platform, but compatibility depends on the contents and settings of representative exports.
Drilled vs. Thermally Cut Structural Bolt Holes
For high-strength bolted joints covered by the RCSC Specification, mechanically guided thermal cutting is permitted in defined conditions and with a specified surface-quality limit. Compare that route with CNC beam drilling against the connection details and the work your shop runs.
RYTECH FORCE ONE Press Brake Maintenance
Plan RYTECH FORCE ONE maintenance from the delivered machine’s documentation, then use bend results, backgauge observations, alarms, and service records to track changes.
HSG R2 Tube Laser for Mixed Profiles
The HSG R2 is a dual-chuck tube fiber laser for round, square, and selected open-profile work. Compare actual profiles, cut geometry, stock limits, and required options with the offered configuration.