HSG GH Automation and U.S. Support
HSG’s reported 500th U.S. installation brings GH automation into focus: match optional Store Pro sheet handling to bending demand and configuration-specific support.
-
-
TRUMPF’s Planned Cutlite Acquisition and Large-Format Lasers
TRUMPF’s planned Cutlite acquisition would expand its large-format cutting portfolio. For oversized sheet and plate work, bed size, laser power, and loading capacity remain distinct decisions.
-
Used CO2 Laser vs. New HSG GH Fiber Laser
Choose between a used industrial CO2 sheet laser and a new HSG GH by usable cutting output, maintenance exposure, machine condition and installed purchase terms—not age or rated power alone.
-
HSG GV Fiber Laser for Short-Contour Sheet Cutting
The HSG GV is worth evaluating when short contours and frequent direction changes constrain an older sheet laser. Compare its linear-motor platform, hydraulic exchange, and selected configuration on complete production nests at the required cut quality.
-
Fiber Lasers | Flat Lasers | Metal Fabrication Equipment | Parts & Service | Preventive Maintenance | Service
HSG G3015XPRO 20KW Chiller Maintenance
Maintain heat rejection, coolant circulation and condensation control on the HSG G3015XPRO 20KW. Lower coolant temperature is not automatically safer.
-
Thunder AccuMetal: Compact vs. Full-Sheet Lasers
Thunder Laser’s September 2026 AccuMetal launch adds two compact cutting formats. Production nests, finished edges and complete batch output determine when a full-sheet industrial fiber laser deserves comparison.
-
HSG G3015XPRO 20KW for Thick-Sheet Cutting
The HSG G3015XPRO 20KW is a candidate for recurring thick-sheet work if representative trials meet the shop’s cut requirements. Confirm the machine’s recorded P20 cutting-head configuration against the installed head before identifying spares.
-
HySpeed Plasma Upgrade vs. HSG GH Fiber Laser
HySpeed’s August 18, 2026 launch adds an upgrade option for compatible Powermax SYNC tables. Evaluate recoverable plasma cycle time against the HSG GH’s cutting platform and optional sheet-handling automation.
-
Grain Direction in Laser Nesting for Press-Brake Parts
Restrict laser-nest rotation only when material guidance, bend requirements, finish specifications, or validated forming results make sheet orientation consequential.
End of content
End of content