Press Brake Sheet Followers for Large Panels
Motorized sheet followers merit evaluation when large laser-cut panels need support during bending, not just positioning. The Falcon’s optional AP3/AP4 system targets sheet flex and sustained holding.
-
-
STEFA VHB Long Folder for Tapered Profiles
The STEFA VHB pairs long sheet-metal folding with conical backgauging for tapered profiles. Material capacity, return clearance, and turning requirements determine application fit.
-
Stefa VDB7.5 Coil Tilter Applications
The Stefa VDB7.5 turns coils 90 degrees before staging or loading downstream equipment. Learn where a dedicated orientation step fits and what coil, handling, and installation details to verify.
-
HSG G3015XPRO 20KW for Thick-Sheet Cutting
The HSG G3015XPRO 20KW is a candidate for recurring thick-sheet work if representative trials meet the shop’s cut requirements. Confirm the machine’s recorded P20 cutting-head configuration against the installed head before identifying spares.
-
Akyapak ASM-S Initial-Pinch Plate Roll for Cylinder Work
An Akyapak ASM-S initial-pinch plate roll can suit cylinder and cone work when the machine’s verified capacity and forming sequence fit the parts. Compare a used machine with a new or four-roll option by testing representative work and weighing condition, edge preparation, and plate handling.
-
Cadrex Expands Data-Center Rack Capacity
Cadrex’s new rack-focused capacity spans punch/laser processing, panel bending, robotic press-brake forming, hardware insertion, and welding. The investment illustrates a multi-process strategy—not a universal case for automation.
-
Erbend MFD for Box-and-Pan and Profile Parts
The Erbend MFD offers two clamping-tool geometries on a rotating beam for shops mixing box-and-pan work with straight profiles. Actual part clearance, bend sequence, and model capacity determine whether the machine fits a specific job.
-
TruLaser Weld 3000 for Small-Batch Welding
The new robotic laser-welding cell targets changing sheet-metal housings through offline programming, path correction and compact optics. Joint fit-up and fixture clearance remain decisive.
-
HSG R1 Tube Laser Financing After the Rate Hike
September 2026’s policy-rate increase calls for updated financing terms, not an automatic purchase delay. Evaluate the HSG R1 against recurring small-tube work, demonstrated production benefits, and the selected loading package.
End of content
End of content