HSG GH Automation and U.S. Support
HSG’s reported 500th U.S. installation brings GH automation into focus: match optional Store Pro sheet handling to bending demand and configuration-specific support.
-
-
Fixed vs. Flying Cutoff for Roofing Roll Formers
Use the STEFA ROLL FORMER LINE as a fixed-shear reference to compare cutoff around panel length, profile tooling and receiving capacity—not nominal forming speed alone.
-
Metals Robot Orders Rise: BLOK Welding Expansion
Rising metals-sector robot orders put the focus on phased welding investment. AGT BLOK offers a common machine family with travel, positioning and programming matched to each plant’s assembly mix.
-
Akyapak AHV Plate Rolls for Thick-Plate Shells
The Akyapak AHV combines adjustable bending leverage with separate end-forming geometry. Evaluate thick-shell work against rolling and prebending capacity at the actual material strength, plate width and finished diameter.
-
NIST MEP Awards and BeamMaster Investment
New MEP awards support automation assistance, not a published BeamMaster rebate. Evaluate the welding workload and complete cell investment.
-
Protecting Prepainted Steel During Coil Slitting
Accurate dimensions do not guarantee an acceptable painted blank. The STEFA LCS2 illustrates how tooling, coated thickness, contact surfaces, protective film and blank removal influence rotary-slitting and cut-to-length equipment selection.
-
HYDMECH CSNC-65 Replacement Blade Selection
Select a CSNC-65 replacement blade by mounting dimensions, stock material, cutting conditions, and regrind eligibility—not diameter alone. Single-use tooling requires replacement; damaged blades must leave service before any recovery decision.
-
TRUMPF’s Planned Cutlite Acquisition and Large-Format Lasers
TRUMPF’s planned Cutlite acquisition would expand its large-format cutting portfolio. For oversized sheet and plate work, bed size, laser power, and loading capacity remain distinct decisions.
-
STEFA LCAS1.5 for Roofing Trim Blanks
The STEFA LCAS1.5 merits consideration for recurring rectangular roofing trim blanks needing both width and length cutting. Coil-width combinations, setup frequency, finish, and downstream flatness determine whether the coil route fits the work.
End of content
End of content