Table of Contents
- General Information
- Intended Use
- Ambient Conditions
- Transport and Storage
- Safety
- Machine Description
- Commissioning
- Operation and Adjustments
- Maintenance
- Troubleshooting
- Spare Parts
- Contact Mac-Tech
General Information
- Manufacturer: Erbend Makina Sanayi ve Ticaret A.Ş.
- Website: erbend.com
- Only trained personnel should perform installation, operation, and maintenance.
Intended Use
- Designed for precise metal sheet cutting in industrial applications.
- Capable of high-power cutting with its 480kW motorized system.
- Operators must follow all safety and maintenance protocols.
Ambient Conditions
- Operating temperature: +5°C to +40°C.
- Relative humidity: 30% to 95%, with no condensation allowed.
- Must be installed in a dry and dust-free indoor environment.
Transport and Storage
- Use designated lifting points to ensure safe handling.
- Transport using a crane; forklifts should not be used.
- Store in a dry environment and protect electrical components from moisture.
Safety
- All operators must be trained and follow safety procedures.
- Ensure that safety warning labels and emergency stop buttons are functional.
- Personal protective equipment (PPE) such as gloves and safety goggles must be worn.
- Never disable safety mechanisms or operate the machine without proper training.
Machine Description
- EMS series models: EMS 2030, EMS 2625, EMS 3220, EMS 4215.
- Equipped with back gauge systems, clamping beams, and a robust motorized shearing system.
- Features high-speed shearing capabilities with automated settings for efficiency.
Commissioning
- Ensure the machine is placed on a stable and level foundation.
- Connect electrical and pneumatic systems per specifications.
- Perform leveling and fixing before operating the machine.
Operation and Adjustments
- Machine modes include single mode, manual mode, and program mode.
- Operators can adjust clamping pressure, blade positioning, and back gauge settings.
- Use the foot switch for precise cutting control.
Maintenance
- Routine lubrication of guide shafts and ball screw components is required.
- Inspect drive bearings and belt tension regularly.
- Ensure hydraulic and electrical components are checked for proper operation.
Troubleshooting
- Common issues include misalignment, power fluctuations, and shearing defects.
- Inspect error messages for diagnostics and follow recommended troubleshooting steps.
- Consult the manufacturer for assistance with complex malfunctions.
Spare Parts
- Includes machine components, pneumatic circuits, and electronic modules.
- Only use original manufacturer spare parts to ensure compatibility and reliability.
Contact Mac-Tech
Address: 8397 N 87th St, Milwaukee, WI 53224
Phone: 414-486-9700
Email: win@mac-tech.com
Website: mac-tech.com
Get Weekly Mac-Tech News & Updates
