Table of Contents

Introduction

This guide explains the installation, configuration, and data exchange process for the IDEA PC bending software. Following these instructions ensures a smooth setup and integration with numerical controls (NC).

System Requirements

  • Display Resolution: 1280×1024 pixels.
  • Operating System: Windows 2000, XP, Vista, 7.
  • Processor: Pentium 1 GHz or higher.
  • RAM: Minimum 512MB.
  • USB port required for software activation.

Installation Sequence

  • Run SetUp.exe to install IDEA PC.
  • Use the USB License Key or email info@stepautomation.it with the “Request Code” to receive an activation code.
  • Enter the activation code in the required field.
  • Load the machine data file from USB.

Supported Languages

  • English, German, French, Italian, Spanish, Turkish, Polish, Dutch, Russian, Czech, Portuguese (Brazil), Finnish, Japanese, and Chinese.

Machine Data Loading

  • Launch the IDEA PC Recovery tool.
  • Click READ and select MACHINE.
  • Choose the machine data file (*.MAC) from USB.
  • Execute PARAMETERS VALIDATE if required.
  • Click REGENERATE DB to update the database.

NC-IDEA PC Connection

  • Connect both NC and PC to the local network (LAN) using standard cables.
  • If using a direct NC-PC connection, use a crossover LAN cable.
  • For LAN with DHCP:
    • Set NC to AUTOMATIC IP: YES.
    • If TCP/IP errors occur, reset the LAN settings and retry.
  • For LAN without DHCP:
    • Set AUTOMATIC IP: NO and enter manual IP settings.
    • Ensure IP, subnet mask, and gateway match the network configuration.
  • Use the PING command in Windows to verify the NC connection.

Firewall Settings

  • The Windows Firewall may block communication between IDEA PC and NC.
  • If connection issues occur, temporarily disable the firewall.
  • Ensure firewall settings allow IDEA PC to communicate through the network.

Data Exchange Between IDEA PC and NC

  • Go to the ARCHIVE page in IDEA PC.
  • Click on ROOT:\USER and select NUMERIC CONTROL to establish a connection.
  • Transfer machine data between NC and IDEA PC as required.
  • If errors occur, check LAN settings or disable the firewall.

Contact Mac-Tech

Address: 8397 N 87th St, Milwaukee, WI 53224

Phone: 414-486-9700

Email: win@mac-tech.com

Website: mac-tech.com

Related Posts

Get Weekly Mac-Tech News & Updates

Parts & Service

Nicole Salato is Mac-Tech’s Service & Parts Lead, ensuring fabricators get the right parts and expert service to keep operations running smoothly. With over a decade in the metal fabrication industry, she specializes in minimizing downtime, sourcing critical machine components, and coordinating expert support. Her solution-driven approach makes her a trusted resource for shops looking to maximize efficiency.

Need parts or service? Nicole is the one to call.

Similar Posts