Table of Contents
- General Information
- Intended Use
- Ambient Conditions
- Transport and Storage
- Safety
- Machine Description
- Commissioning
- Operation and Adjustments
- Maintenance
- Troubleshooting
- Spare Parts
- Contact Mac-Tech
General Information
- Manufacturer: Erbend Makina Sanayi ve Ticaret A.Ş.
- Website: erbend.com
- Intended for trained personnel for installation, operation, and maintenance.
Intended Use
- Designed for bending sheets made of steel and alloy metals.
- Suitable for industrial and manufacturing environments.
- Only trained personnel should operate, maintain, and repair the machine.
- Unauthorized modifications void warranty and liability.
Ambient Conditions
- Operating temperature: +5°C to +40°C.
- Relative humidity: 30% to 95%, no condensation allowed.
- Machine must be used in a covered area, protected from sunlight and moisture.
Transport and Storage
- Use lifting lugs marked on the machine for safe lifting.
- Transport using a crane; forklifts should not be used.
- Store the machine in a dry, vibration-free environment.
Safety
- Follow all workplace safety regulations.
- Safety devices must remain operational at all times.
- Personal protective equipment (PPE) must be used by operators.
- Emergency stop systems should be tested before operation.
Machine Description
- ER Bend MFD series models: MFD 2525, MFD 3220, MFD 4215.
- Features include a back gauge system, clamping beam, and motorized folding system.
- Multiple axes (X, Y, A, Z, C) enable precise control over bending operations.
Commissioning
- Ensure the machine is installed on a level and stable surface.
- Connect electrical and pneumatic systems per specifications.
- Perform axis calibration before the first operation.
Operation and Adjustments
- Includes single mode, manual mode, and program mode for operation.
- Adjustments for tool positioning, crowning system, and back gauge alignment.
- Use the foot switch for hands-free control.
Maintenance
- Follow the lubrication schedule for all moving parts.
- Inspect and replace worn components regularly.
- Perform daily cleaning to maintain system efficiency.
Troubleshooting
- Diagnose common faults related to software and mechanical misalignment.
- Check for power failures, hydraulic leaks, and software calibration issues.
- Consult the manufacturer for any unresolved issues.
Spare Parts
- Includes clamping beam, back gauge components, and pneumatic circuits.
- Use only original spare parts for repairs and replacements.
Contact Mac-Tech
Address: 8397 N 87th St, Milwaukee, WI 53224
Phone: 414-486-9700
Email: win@mac-tech.com
Website: mac-tech.com
Get Weekly Mac-Tech News & Updates
