Table of Contents
- Introduction
- Standard Interface
- Setup Pages
- Programming
- Production
- Axes Description
- Importing DXF Files
- Troubleshooting
- Contact Mac-Tech
Introduction
The ERFOLD 2D-3D CNC system is a high-precision folding machine controller, designed for graphical and numeric programming, allowing for intuitive part creation and bending simulation.
Standard Interface
- Includes high-resolution LCD with touchscreen controls.
- Supports multi-axis numeric control for folding machine operations.
- Remote service connection available via TeamViewer and DWService.
Setup Pages
- Preset values configuration for all axes.
- Machine report system to track operational history.
- Language, unit measurement, and network settings available.
Programming
- Programs can be created for automatic folding operations.
- Tool setup allows precise positioning of clamping and folding tools.
- Editor supports both 2D and 3D part programming.
- Simulation mode enables real-time testing of bending sequences.
Production
- Automatic execution of programmed bending sequences.
- Supports step-by-step processing for custom adjustments.
- Integrated part counter for production tracking.
Axes Description
- Z-axis: Distance between the clamping tool tip and the lower beam.
- X-axis: Distance between the back gauge fingers and the folding tool rotation center.
- A-axis: Positioning for folding beam height.
- Y-axis: Folding beam rotation angle.
Importing DXF Files
- DXF files can be loaded for part creation and editing.
- Supports automatic detection of bend lines and angles.
- Convert DXF data into 3D part profiles for full processing.
Troubleshooting
- Common errors include incorrect tool positioning and software misconfiguration.
- Review machine logs and settings before running new programs.
- Consult error messages for axis calibration and motor control faults.
Contact Mac-Tech
Address: 8397 N 87th St, Milwaukee, WI 53224
Phone: 414-486-9700
Email: win@mac-tech.com
Website: mac-tech.com
Get Weekly Mac-Tech News & Updates
