Table of Contents

Introduction

The DA-69T CNC control system is a high-precision press brake controller with a touchscreen interface, real-time bend simulations, and advanced programming features.

Control Unit Overview

  • Touchscreen display with high-resolution graphics.
  • USB, RS-232, and Ethernet connectivity for data transfer and backup.
  • Graphical and numerical programming options for complex bending operations.
  • Built-in collision detection and bend simulation.

Operation Modes

  • Manual Mode: Direct axis control and fine adjustments.
  • Programming Mode: Create, edit, and manage bending sequences.
  • Automatic Mode: Executes pre-programmed bends in sequence.
  • Step-by-Step Mode: Allows manual execution of each bending step.

Getting Started

  • Set up material properties and machine settings.
  • Load, edit, and modify product drawings.
  • Define bending order and tool positioning.

Product Programming

  • Create 2D and 3D product drawings for CNC execution.
  • Use graphical or numerical input methods for defining bends.
  • Assign tools, materials, and flange lengths for accurate bending.

Bend Sequencing

  • Automatic or manual bend sequence calculation.
  • Real-time bend simulation and error detection.
  • Modify bend orders and parameters as needed.

Automatic Mode

  • Fully automated bending cycle execution.
  • Adjust X, Y, and Z axes positioning in real-time.
  • Monitor machine performance and optimize cycle times.

Manual Mode

  • Fine-tune individual bends and adjust settings.
  • Use handwheel or touchscreen for precise control.
  • Perform calibration and axis positioning manually.

Troubleshooting & Diagnostics

  • Analyze system logs and error messages.
  • Restore backup configurations to prevent downtime.
  • Perform system diagnostics and calibration tests.

Contact Mac-Tech

Address: 8397 N 87th St, Milwaukee, WI 53224

Phone: 414-486-9700‬

Email: win@mac-tech.com

Website: mac-tech.com

Related Posts

Get Weekly Mac-Tech News & Updates

Parts & Service

Nicole Salato is Mac-Tech’s Service & Parts Lead, ensuring fabricators get the right parts and expert service to keep operations running smoothly. With over a decade in the metal fabrication industry, she specializes in minimizing downtime, sourcing critical machine components, and coordinating expert support. Her solution-driven approach makes her a trusted resource for shops looking to maximize efficiency.

Need parts or service? Nicole is the one to call.

Similar Posts