Table of Contents
- General Information
- Safety
- Machine Description
- Transport and Storage
- Installation and Commissioning
- Machine Adjustments
- Operation
- Maintenance
- Troubleshooting
- Spare Parts
- Contact Mac-Tech
General Information
- Manufacturer: Erbend Makina Sanayi ve Ticaret A.Ş.
- Website: erbend.com
- Do not modify or alter the machine without manufacturer approval.
Safety
- Only trained personnel should operate the machine.
- Safety features include emergency stop buttons and light barriers.
- Protective equipment such as gloves, safety shoes, and goggles must be used.
- Follow all electrical safety guidelines, including proper grounding and inspection of cables.
Machine Description
- The D-MFA series is designed for precision metal folding applications.
- Machine axes include Z, A, X, Y, C, D, and B for full motion control.
- Capable of handling mild steel, aluminum, and stainless steel with varying thickness capacities.
Transport and Storage
- Transport using lifting points; forklifts should not be used.
- Store in a dry, temperature-controlled environment.
- Before long-term storage, perform maintenance and protect against moisture.
Installation and Commissioning
- Level the machine using precision tools.
- Secure with anchor screws into reinforced concrete flooring.
- Electrical and pneumatic connections should be made by qualified personnel.
- Follow back gauge assembly steps if additional consoles are required.
Machine Adjustments
- Leveling the machine ensures accuracy in bending operations.
- Adjust C, Z, and X axes for optimal alignment and precision.
- Fine-tune the back gauge system for material positioning.
Operation
- Main switch controls power; emergency stops should be tested before use.
- Use the foot switch for controlled folding operations.
- Define folding tools and crowning system settings based on material type.
- Perform up/down bending functions as per the operational needs.
Maintenance
- Regular lubrication of X, A, Z, and B axes is required.
- Inspect friction plates and replace worn components.
- Clean the machine daily to prevent buildup of dust and debris.
- Maintain the pneumatic system by checking for leaks and proper air pressure levels.
Troubleshooting
- Common faults include misalignment, power issues, and material slippage.
- Check the software for any configuration errors.
- Inspect electrical connections and pneumatic circuits for leaks.
Spare Parts
- Includes clamping beam, folding beam, and back gauge components.
- Pneumatic circuit drawings and parts lists are available for repairs.
- Only original manufacturer parts should be used for replacements.
Contact Mac-Tech
Address: 8397 N 87th St, Milwaukee, WI 53224
Phone: 414-486-9700
Email: win@mac-tech.com
Website: mac-tech.com
Get Weekly Mac-Tech News & Updates
