CybTouch 12 PS: User Manual and Datasheet for Synchronized Press Brakes

Table of Contents

• Introduction
• Features
• Hardware Specifications
• Technical Characteristics
• Getting Started
• Basic Functions
• Programming
• Bending and Corrections
• Troubleshooting
• Contact Mac-Tech

Introduction

The CybTouch 12 PS is an advanced press brake control system designed for synchronized press brakes with up to 4 axes. With an intuitive touchscreen interface, real-time bending adjustments, and built-in automation tools, it provides a seamless and efficient operation for press brake machines.

Features

• 12” full-color touchscreen with large, high-contrast buttons.
• Graphical profile drawing and real-time 2D programming.
• Manual and automatic bend sequencing.
• Memory capacity for up to 300 programs, 100 punches, and 100 dies.
• RFlink wireless communication for data transfer and system backup.
• Eco mode for energy efficiency, reducing pump idle time.
• Configurable screen layout to match operator preferences.

Hardware Specifications

• 12” TFT color display with 800×600 resolution.
• 2 GB Micro SD card with firmware upgrade capability.
• USB and RS232 ports for communication.
• ±10V DC for AC/DC motor drives and frequency converters.
• 16 optocoupled digital inputs and 21 digital outputs.
• Encoder compatibility with 5V, 12V, and 24V power options.

Technical Characteristics

• Advanced beam management for precise movement and smooth operation.
• Automatic bend depth and pressure calculations.
• Support for crowning and back gauge clearance settings.
• Indexing and auto-tuning for bending beam and back gauge positioning.
• Built-in oscilloscope for beam trajectory monitoring.
• Fully customizable configuration for different machine models.

Getting Started

• Easy navigation through the touchscreen interface.
• Customizable user settings including force, length, and sigma units.
• Support for multiple languages and unit conversions.
• RFlink wireless connectivity for remote monitoring and diagnostics.

Basic Functions

• Quick and simple program creation with TouchProfile.
• Comprehensive tool management for punches and dies.
• Bend numerical mode with real-time graphical feedback.
• Material database with predefined settings for different thicknesses.
• Back gauge retraction and speed change threshold settings.

Programming

• Step-by-step guide to creating and saving programs.
• Manual and automatic bend sequence calculation.
• TouchProfile mode for graphical part programming.
• Copy to All function for batch editing multiple steps.
• Customizable cycle parameters for optimal productivity.

Bending and Corrections

• Angle correction with automatic Y-axis adjustments.
• Crowning correction for compensating material inconsistencies.
• Offset Pinch Point for advanced bend cycle control.
• Back gauge (X & R axes) position corrections.
• Real-time error detection and correction suggestions.

Troubleshooting

• Built-in diagnostics for identifying machine issues.
• Detailed error codes for quick resolution.
• Beam synchronization and alignment troubleshooting.
• Internal reset messages for restoring factory settings.
• Maintenance reminders and service logs.

Contact Mac-Tech

Address: 8397 N 87th St, Milwaukee, WI 53224

Phone: 414-486-9700‬

Email: win@mac-tech.com

Website: www.mac-tech.com