| | | |

CNC Beam Drill Outfeed for Shared Crane Pickup

Overview

Straight roller outfeed works when the crane or next station reliably clears discharge before the next member needs the space. If shared-crane delays keep blocking discharge, price a cross-transfer to a separate, safeguarded pickup position that fits your bay.

  • Count usable waiting positions separately from conveyor footage. If an inline miter bandsaw makes the final cut, count only positions after the saw. If one beam must wait while another exits, have the supplier show both at their finished lengths and mark which roller zones must stay clear.
  • Compare how many beams finish during a crane delay with how many can wait off the working rollers. Side staging helps only if a pickup spot is open and the transfer finishes before the next discharge. It won’t fix a persistent crane bottleneck.
  • Don’t assume side pickup is included in a 3ADM 1200 Beam quote. Have the supplier and qualified site personnel review crane reach, load clearance, aisle access and guarding.
  • Select Get a Quote on the 3ADM 1200 Beam page. Bring me a scaled bay plan, representative beam drawings with finished lengths and weights, and an example of a crane delay that blocked discharge.

Straight roller outfeed is enough for a CNC beam drill when the next station or crane reliably clears the discharge zone before the next member needs it. If intermittent delays from a shared crane repeatedly block discharge, price a cross-transfer to a separate, safeguarded pickup position that fits the bay. On November 8, 2026, Northern Machinery Sales announced that it now carries Gator Fabrication Technology’s structural steel line. The dealer lineup addition included the three-spindle BEAMX 3X 1200, with nominal 40-foot conveyors at each end. That footage is useful for comparing layouts, but it does not tell you where a finished beam can wait.

Locate pickup after the last operation

Akyapak’s 3ADM 1200 Beam, a separate Mac-Tech offering, uses three independent spindles to drill structural sections from three sides. That makes it a fit for recurring web and flange connection holes on wide-flange beams and columns. On a drill-only line, the drilled beam exits onto the rollers for pickup or travel to the next station. With the optional inline miter bandsaw, the feeding arm advances the drilled stock to the saw, and the cut member moves onto the output conveyor. If the saw makes the final cut, count finished-member waiting positions after the saw, not on the rollers feeding it.

A published reference configuration for the 3ADM 1200 Beam has 12 meters of conveyor at each end, roughly the same as the Gator’s nominal footage. Compare the installed quotes on two separate lines: conveyor length and the number of finished members that can wait without blocking discharge. If a straight layout is meant to hold a beam while the next one comes out, ask the supplier to show both members at their actual finished lengths and explain which roller zones must remain clear.

When side staging earns the floor space

On straight outfeed, a wide-flange beam waiting for the crane stays on the rollers. A cross-transfer can move that same beam sideways to a separate pickup position while the crane is elsewhere, provided the position is open and the move finishes before the next discharge. Compare how many members finish during a recurring crane delay with how many can wait clear of the working rollers. If the crane or next operation consistently clears beams more slowly than the line releases them, the side lane will fill too.

Transfer tables are documented for Akyapak’s 3 ADM family, but a side pickup position is not a given in a 3ADM 1200 Beam quote. Put the proposed transfer and pickup point on the same scaled drawing. Have the supplier and qualified site personnel review crane reach, clearance for the load around columns and neighboring work, aisle access, and guarding around the moving equipment. The installed quote should spell out the usable waiting positions for your members and the transfer equipment, controls and safeguards included.

I’m Dave Graf, a Regional Sales Executive at Mac-Tech. Bring me a scaled bay plan, representative beam drawings with finished lengths and weights, and an example of a crane delay that blocked discharge. Include your longest and heaviest members and how many beams finished while the crane was busy. I can help you compare straight outfeed with side staging and decide what to specify for the saw, conveyors and transfer. Select Get a Quote on the 3ADM 1200 Beam page to start that discussion.

Sources

Get Weekly Mac-Tech News & Updates