Can a Tube Laser Replace Sawing and Notching?
A tube laser can combine length cuts with selected feature-making, but the HSG R2’s fit depends on the actual profile, stock condition, tolerances, configuration, and batch pattern.
-
-
When Bidirectional CNC Tube Bending Fits High-Mix Parts
A fully electric right- and left-hand CNC tube bender fits high-mix shops when changing bend directions, radii, tooling, and part families make setup and reorientation a recurring production constraint. The decision still depends on representative-part testing and the exact machine configuration.
-
When a Used Tube Laser Needs a Retrofit
A used CNC tube laser is a capacity purchase only when it can run representative work safely and repeatably without rebuilding core systems. The HSG TS2 V2.0 provides a current benchmark for profile range, handling, controls, safety, and support.
-
HSG TS2 V2.0 for High-Mix Tube Cutting
The HSG TS2 V2.0 is worth evaluating when short-run tube work includes holes, slots, contours, or selected bevel and weld-preparation features—not just straight cuts. This guide explains where 3D tube-laser processing can improve routing and where a saw, drill, flat-laser route, or outsourcing may still be the better fit.
-
TRUMPF TruLaser Weld 3000 for High-Mix Welding
The TRUMPF TruLaser Weld 3000 is aimed at small-batch sheet-metal assemblies where compact robotic access, CAD-based programming, and repeatable fit-up can turn variable work into flexible laser-welding capacity.
-
Laser Angle Measurement on an Ermaksan Power-Bend Pro
Laser angle measurement is worth considering on a high-mix Ermaksan Power-Bend Pro when springback-driven correction hits repeatedly interrupt production. It is less useful when the actual loss comes from tooling, flat blanks, gauging, deflection, or programming.
-
Shared Sheet Storage for Multiple Fiber Lasers
A shared HSG Store Pro tower can fit a high-mix shop with multiple fiber lasers when the machines share enough sheet inventory to justify one coordinated material path. The decision turns on sheet-envelope overlap, scheduling, remnant control, downstream flow, and recovery planning—not tower height alone.
-
Ermaksan EVO-IV Press Brake for Laser-Cut Sheet Metal
The Ermaksan EVO-IV fits job shops that bend varied laser-cut blanks and need a configurable CNC press brake. Its servo-hybrid drive, broad length and tonnage range, six-axis machine configuration, motorized crowning, and optional control and measurement features can support variable cut-to-bend work, but the correct configuration still depends on part geometry, tooling, utilization, safeguards, and capacity.
-
Used vs. New CNC Tube Lasers in 2026
Used CNC tube lasers can still deliver value in 2026 when proven capacity, safety, software, and support fit the work. Compare representative-part performance and ready-to-produce costs against new automation, profile handling, and bevel capabilities.
End of content
End of content