HSG BEVEL-G6025V Sheet Bevel Laser
HSG’s EuroBLECH 2026 showcase brings integrated sheet cutting and bevel preparation into focus. Compare finished-edge requirements and total processing time before replacing a separate operation.
HSG’s EuroBLECH 2026 showcase brings integrated sheet cutting and bevel preparation into focus. Compare finished-edge requirements and total processing time before replacing a separate operation.
Bow, twist, section variation, and weld-seam position can affect where tube features land relative to a drawing datum. Learn how to evaluate HSG TS2 V2.0 support and sensing options—and what to test on representative stock.
The HSG TS2 V2.0 merits evaluation when recurring tube or profile parts need cut features, end geometry, or weld-prep bevels. Match the bevel option, material envelope, and handling setup to the actual parts and quoted configuration.
Swift-Cut’s first CNC fiber laser introduces 3-kW and 6-kW configurations for 5-by-10-foot sheet work, with a manual pull-out cutting deck. Buyers should test representative parts and assess sheet handling and downstream flow—not choose on power rating alone.
Use a bend relief where a press-brake bend ends beside constrained material or meets another flange. Set its shape, width, depth, and remnant around the actual bend zone and the finished corner the part needs.
The HSG R1 fits recurring small round- and square-tube work when programmed cut features and end-of-bar tailings both matter. Its chuck-jumping feature is intended to shorten remnants, but actual part results and remaining stock need to be measured on representative jobs.
The HSG TX3R is a candidate for angle and channel cutting, but tube ratings alone do not qualify an open-profile application. Validate gripping, support, cut access, tolerances, and downstream fit on representative stock.
Bystronic’s agreement to acquire Isochronic points to a possible future expansion of its automation portfolio, not a newly available combined system. Fabricators should first determine whether laser outfeed and part sorting are limiting production flow.
The HSG TPSD combines tube-laser cutting with mechanical thermal drilling and tapping. Learn when that integrated route may fit recurring tube parts and what to validate before relying on formed threaded holes.
End of content
End of content