Overview
Compare the SPEED-BEND 3760-175 and EVO-IV by separating part-forming requirements from hydraulic-drive energy use. Backgauge servos position the blank; EVO-IV’s servo-hybrid main drive supplies hydraulic power on demand. It remains hydraulic, not hydraulic-free servo-electric.
- The used SPEED-BEND’s six controlled axes include ram movement; this is not a six-axis backgauge. Confirm condition, availability, controls and tooling. Verify main-motor start-stop on the individual machine rather than assuming a SPEED-BEND PRO family option is installed.
- EVO-IV’s claim of up to approximately 65% lower energy demand comes from an Ermaksan benchmark against a conventional hydraulic reference: a 220-ton, 3,100 mm brake over 870 cycles in eight hours. It is not a head-to-head SPEED-BEND result.
- Estimate energy use from actual bending, repositioning, tool changes and waiting, with a defined electrical-measurement boundary. The published percentage cannot establish shop-specific savings, payback or throughput gains.
- Check punch and V-die suitability, forming force, flange length and radius—not tonnage alone. For channels and panels, verify bend length, tool stack, open height, stroke, removal clearance and gauge contacts throughout the sequence.
The SPEED-BEND 3760-175’s servo positioning and Ermaksan EVO-IV’s servo-hybrid main drive perform different jobs: locating the blank versus supplying hydraulic bending power on demand. For laser-cut brackets, channels and panels, compare that energy-related distinction separately from the tooling, gauging and clearance needed to form the part.
EVO-IV’s first EuroBLECH appearance was announced on August 28, 2026, for the October 20–23, 2026 exhibition. Its September 8, 2026 technical announcement added the main-drive explanation and an energy benchmark. Those developments give buyers a specific reason to distinguish positioning hardware from hydraulic power generation when comparing equipment.
Two different jobs for servo motors
Backgauge servos move the stops used to locate a blank for successive bends. Their presence does not, by itself, identify the motor-and-pump arrangement generating hydraulic pressure. A servo-motor entry in an equipment description is therefore not enough to classify the hydraulic main drive.
EVO-IV combines servo control of the main motor and backgauge motors with a closed-loop hydraulic system. Hydraulic power is supplied when needed. Its servo-hybrid distinction concerns that power-generating arrangement; the bending system remains hydraulic, not hydraulic-free servo-electric.
What the selected SPEED-BEND offers
The SPEED-BEND 3760-175 PERFORMANCE PRESS BRAKE is advertised as used equipment with a Delem touchscreen CNC, six controlled axes—Y1, Y2, X, R, Z1 and Z2—motorized wedge crowning and a tooling package. That axis count includes ram movement; it is not a six-axis backgauge. Motorized crowning addresses deflection, while the backgauge positions the work for successive bends.
The current SPEED-BEND PRO family also offers optional main-motor start-stop, so a hydraulic-brake energy comparison should not assume every machine idles identically. Establish whether that feature is installed on this SPEED-BEND rather than transferring a family option to the individual machine. A current quote should confirm condition, availability and the included controls and tooling.
What the energy benchmark establishes
EVO-IV’s energy claim is up to approximately 65% lower demand than a conventional hydraulic reference under an Ermaksan benchmark using a 220-ton, 3,100 mm brake over 870 cycles in eight hours. The reference is not identified as the selected SPEED-BEND, so this is not a head-to-head result for the two configurations.
For an application-specific comparison, base the energy estimate on the actual periods of bending, repositioning, tool changes and waiting, using a defined electrical-measurement boundary. The installed drive and idle-control features matter on both sides of the comparison; the published percentage cannot establish a particular shop’s savings or payback.
Lower hydraulic energy demand also does not sort blanks, change tools or move a panel. Material and tool handling remain separate contributors to elapsed production time. A throughput improvement needs its own production case rather than being inferred from an energy percentage.
Tooling and geometry still determine part fit
Air bending forms sheet across a lower die opening. That opening links required force, inside radius and minimum flange length; force-chart values apply under stated material-strength and bend-angle conditions, not universally across every material and bend.
For a short-flange mounting bracket, evaluate whether the proposed punch and V-die support the flange and radius requirements at the required forming force. For channels and enclosure panels, compare the formed geometry with the available bend length, tool stack, open height, stroke and removal clearance. Holders and adapters consume usable open height, so nominal tonnage alone cannot establish fit.
For repeated multi-bend work, compare the required gauge contacts through the bending sequence with the offered backgauge movements. The resulting equipment proposal should distinguish an energy-related main-drive choice from a need for different positioning, clamping or tooling.
Discuss the SPEED-BEND application with John Perry
I’m John Perry, Mac-Tech’s Regional Sales Executive for Wisconsin, Michigan, Illinois and the surrounding Midwest. I can help assess the SPEED-BEND 3760-175 against your laser-cut work, separate main-drive energy questions from positioning and tooling needs, and review equipment options and a current quote with Mac-Tech. Bring representative flat patterns and formed drawings, material grades and thicknesses, bend lengths and radii, existing tooling details, batch quantities and a realistic bending sequence.
Sources
- Ermaksan to Highlight Energy-Efficient Manufacturing at EuroBLECH 2026
- ERMAKSAN Introduces EVO-IV Servo Hybrid Press Brake for Energy-Efficient Fabrication
- SPEED-BEND 3760-175 PERFORMANCE PRESS BRAKE
- SPEED-BEND PRO
- EVO-IV
- Air Bending Force Chart, B332F
- Need Help with Press Brake Operator Training?
- A Investigation of Efficiency of Servo Motor Drive Hybrid Press Brake System: A Comparative Study with a Traditional Application
Get Weekly Mac-Tech News & Updates
