Overview
Choose an ERMAKSAN SPEED BEND PRO backgauge around the finger positions needed throughout the bend sequence, rather than the axis total. Evaluate X5 for unequal gauging depths without separate finger-height control, and ATF for independent depth, height and lateral positioning. Either approach needs a repeatable lateral reference for the blank.
- The standard X, R, Z1 and Z2 backgauge may be sufficient if another usable reference surface permits the required positioning. A tapered outline alone does not justify ATF.
- X5 adds a specified ±100 mm movement at one backgauge latch. That is not a maximum flange taper; the required adjustment depends on the contact locations.
- ATF has six backgauge axes, with travel and clearance limits to confirm for the quoted configuration. The standard machine’s six-axis description includes Y1 and Y2—not six backgauge axes.
- Review intended contacts, the lateral reference and tooling clearance through every bend. Bring a finished-part drawing, flat-pattern CAD and an actual blank sample to compare configurations on the same component.
The ERMAKSAN SPEED BEND PRO can be configured for tapered-flange work, but the backgauge choice should follow the required finger positions—not axis count alone. Evaluate X5 for differential-depth gauging and ATF when the two finger assemblies need independent positioning. Either approach still needs a repeatable sideways reference for the blank.
This synchronized CNC hydraulic press brake is worth evaluating for laser-cut brackets, tapered covers, guards and multi-bend panels with asymmetric gauging requirements. The useful purchase distinction is whether one finger needs an additional depth adjustment or both assemblies need separate depth and height positioning.
What a tapered flange requires
Here, a tapered flange means the bend line is not parallel to the usable gauging edge. The bend remains straight, while the flange width varies along it. Unequal left and right finger depths orient the blank; a repeatable lateral reference keeps the bend line in the same sideways position. A tilted ram is not the locating method for this application.
Compare standard, X5 and ATF backgauges
The standard X, R, Z1 and Z2 backgauge provides depth positioning through X, height through R and lateral finger positioning through Z1 and Z2. Lateral finger movement does not itself provide separate left and right depth control. If another usable reference surface permits the required positioning, the standard arrangement may be sufficient even when the finished component has a tapered outline.
The five-axis X5 arrangement adds X5 to X, R, Z1 and Z2. One backgauge latch has a specified movement of ±100 mm. This arrangement is worth evaluating when unequal gauging depths are needed without separate height control for each finger assembly. That movement figure is not a maximum flange taper: the required adjustment depends on where the two contacts sit on the blank.
The ATF six-axis backgauge uses independently moving X1, X2, R1, R2, Z1 and Z2 axes. Separate depth, height and lateral positioning makes it a candidate for asymmetric components whose usable contacts differ on the two sides or change during forming. Independent motion still has travel and clearance limits; obtain those limits for the quoted configuration.
These counts describe backgauge axes. The standard machine’s six-axis description includes Y1 and Y2 as well as X, R, Z1 and Z2—it does not describe a six-axis backgauge.
A tapered outline alone does not justify ATF. Conversely, an X5 option that accommodates the first bend may not accommodate later operations. Compare the complete sequence’s contact depths, heights and finger separation before choosing either option.
Keep the laser-cut reference usable
A flat-pattern drawing cannot show every condition the gauge fingers will encounter on the delivered blank. Microtab remnants at a contact point can make the sheet rock against the backgauge, and earlier bends can make a reference harder to reach.
Mark the intended contacts on the flat pattern and review them through the forming sequence. Include the proposed lateral reference in that review; do not assume a side-gauge attachment is standard equipment or that programmed finger movement automatically locates the sheet sideways.
Match the gauging choice to tooling and machine size
The forming method, punch radius and die opening must agree with the developed flat pattern. A more capable backgauge cannot correct a blank calculated around different forming assumptions. The tooling and proposed sequence also need enough clearance for previously formed flanges while preserving usable gauge contacts.
CNC-controlled motorized crowning provides deflection compensation where fitted. It addresses a different problem from orienting a tapered blank and does not replace a lateral reference. Confirm crowning and usable opening, stroke and tooling clearance against the quoted machine size rather than relying on a family-level feature description.
The useful comparison is therefore between configurations applied to the same representative component—not between axis totals in isolation. A quote discussion should establish whether X5 can reproduce the necessary contacts or whether independent ATF motion is needed to complete the sequence.
Discuss the configuration with John Perry
I’m John Perry, a Regional Sales Executive at Mac-Tech. I can help assess how laser-cut blank geometry, tooling, CNC positioning and bend sequence affect a SPEED BEND PRO purchase. Bring a finished-part drawing, flat-pattern CAD, material and tolerance information, existing tooling details and a sample showing the actual cut edges and tabs. With your intended gauge contacts, batch quantities and repeat frequency, I can help compare the relevant backgauge options and develop the application information for a Mac-Tech machine quote.
Sources
Get Weekly Mac-Tech News & Updates
