Table of Contents
- General Information
- Intended Use
- Ambient Conditions
- Transport and Storage
- Safety
- Machine Description
- Commissioning
- Operation and Adjustments
- Maintenance
- Troubleshooting
- Spare Parts
- Contact Mac-Tech
General Information
- Manufacturer: Erbend Makina Sanayi ve Ticaret A.Ş.
- Models: MFA 2140, MFA 2535, MFA 3230, MFA 4225.
- Only trained personnel should install, operate, and maintain the machine.
Intended Use
- Designed for precise sheet metal bending operations.
- Only trained personnel should operate and perform maintenance.
- Misuse of the machine voids warranty and manufacturer liability.
Ambient Conditions
- Operating temperature: +5°C to +40°C.
- Relative humidity: 30% to 95%, with no condensation.
- Must be used in a dry, dust-free environment.
Transport and Storage
- Use lifting lugs for proper handling.
- Do not use a forklift; lifting must be done with a crane.
- Store in a dry area with stable temperature conditions.
Safety
- Operators must follow all safety protocols.
- Ensure all emergency stop buttons and safety barriers are functional.
- Safety equipment should never be deactivated.
- Use personal protective equipment (PPE) such as gloves and goggles.
Machine Description
- Includes back gauge system, clamping beam, and folding beam.
- Capable of handling different sheet thicknesses for various materials.
- Equipped with multiple axes for precision control.
Commissioning
- Ensure the machine is installed on a flat, stable surface.
- Connect power and air supply per specifications.
- Perform system calibration before operation.
Operation and Adjustments
- Manual, automatic, and program modes available.
- Adjust tool positioning, crowning system, and back gauge settings.
- Use the foot switch for hands-free bending operations.
Maintenance
- Follow the lubrication schedule for moving parts.
- Inspect and replace worn components regularly.
- Perform daily cleaning to maintain efficiency.
Troubleshooting
- Common errors include software misconfiguration and tool misalignment.
- Refer to machine logs for diagnostic messages.
- Calibration must be performed before starting new operations.
Spare Parts
- Includes clamping beam, back gauge components, and pneumatic circuits.
- Only use manufacturer-approved spare parts.
Contact Mac-Tech
Address: 8397 N 87th St, Milwaukee, WI 53224
Phone: 414-486-9700
Email: win@mac-tech.com
Website: mac-tech.com
Get Weekly Mac-Tech News & Updates
