DA-66W User Manual: Operation, Programming & CNC Control

Table of Contents

• Introduction
• Control Unit Overview
• Operation Modes
• Getting Started
• Product Programming
• Bend Sequencing
• Automatic Mode
• Manual Mode
• Troubleshooting & Diagnostics
• Contact Mac-Tech

Introduction

The DA-66W control system is a high-performance CNC controller for press brakes, offering intuitive programming, graphical visualization, and real-time control of bending processes.

Control Unit Overview

• **15” touchscreen display** with intuitive interface.
• **USB, RS-232, and Ethernet connectivity** for data management.
• Supports **graphical and numerical programming** for complex bending operations.
• Built-in **collision detection and bend simulation** for enhanced precision.

Operation Modes

• **Manual Mode:** Direct control of machine movements.
• **Programming Mode:** Create, edit, and manage bending sequences.
• **Automatic Mode:** Execute pre-programmed bends with automation.
• **Step-by-Step Mode:** Process each bend separately for custom adjustments.

Getting Started

• **Configure material properties** and machine settings.
• **Load and edit product drawings** for bending operations.
• Define **bend order and tool positioning** for efficient workflow.

Product Programming

• **Create 2D and 3D product drawings** for CNC programming.
• Use **graphical or numerical input methods** for bend specifications.
• Assign **tools, materials, and flange lengths** for accurate bending.

Bend Sequencing

• Use **automatic or manual bend sequence calculation**.
• Perform **real-time bend simulation and error detection**.
• Modify **bend orders and parameters** as needed.

Automatic Mode

• Run **fully automated bending cycles** with pre-set sequences.
• Adjust **X, Y, and Z axes positioning** dynamically.
• Monitor **machine performance and cycle efficiency**.

Manual Mode

• Enable **fine-tuned adjustments for specific bends**.
• Use **handwheel or touchscreen** for control.
• Perform **calibration and axis positioning** manually.

Troubleshooting & Diagnostics

• Analyze **error messages and system logs** for issues.
• Restore **backup configurations** to prevent downtime.
• Perform **system diagnostics and calibration tests**.

Contact Mac-Tech

Address: 8397 N 87th St, Milwaukee, WI 53224

Phone: 414-486-9700‬

Email: win@mac-tech.com

Website: mac-tech.com