2014 DMG MORI NZX 2500/600L

Capacity:

• Swing Over Bed in 30.7
  • Turret 1 in 14.5
  • Turret 2 in 10.
• Max Height length in 23.6″

Travel:

• X-Axis Travel
  • Turret 1 in 8.9 (7.3+1.6)
  • Turret 2 in 6.7 (5.1+1.6)
• Z- Axis travel
  • Turret 1 in 25.6
  • Turret 2 in 25.6

Spindle:

• Max Spindle Speed
  • Standard min 4,000
    • Through-spindle hole diameter 2.9″ min (5,000)
    • Through-Spindle hole diameter 4.4″ (2,500)
• Number of spindle speed ranges 1

Turret:

• Number of tool slides 2
  Turret Type:
  • Turret 1 12-station
  • Turret 2 8-station
• Number of tool stations:
  • Turret 1 12-station
  • Turret 2 8-station
  • Shank height for square tool in 1.0
  • Shank diameter for boring bar in max 2.0
  • Turret indexing time sec 0.2

Feedrate:

• Rapid traverse rate:
  • X1 Axis ipm 984
  • X2 Axis ipm 984
  • Z1 Axis ipm 1,181
  • Z2 Axis ipm 1,181
  • Jog feedrate

Tailstock:

• Tailstock travel in 23.6
• Tailstock spindle diameter in 4.3
  • Live Center MT5
• Built-in Center MT4
• Tailstock spindle travel in 220

Motors:

• Spindle drive motor: HP 34 Through
• Through Spindle Hole Diameter 2.9″ HP 30
• Through Spindle Hole Diameter 4.4″ HP 30