stefa-folding-machine-vh
Stefa-folding-machine-vh
stefa-folding-machine-vh
stefa-folding-machine-vh
stefa-folding-machine-vh

Stefa Folding Machine VH

Long beam folding machine with state of the art technology.

Profile bend lengths of 4000mm, up to 3mm material thickness. Rotational lower beam offering folding angles up to 145°. Material backed gauge of 1070mm stroke.

Standard simple touch CNC control software is specifically designed for long beam bending of cladding roofing profiles. Touch screen control makes your programs step-by-step allowing for simple repeatability.

Our selection of metal folding machines is unparalleled and affordable. Contact our team today.

Get a Quote

Videos Stefa Folding Machine VH

Stefa Folding Machine VH

Description

Description

Mac-Tech’s long metal folding machines stand out for their precision, cost-effectiveness, and state-of-the-art versatility for easy operation. Using the unique bending beam technology, Mac-Tech’s long sheet metal benders produce a rotation against the material that is clamped by the beam. This allows for working with the most delicate of surfaces without damaging the product, as is typically the case with thinner (between 0.5 to 0.8mm) coated and lacquered material, and depending on the number of arms the Mac-Tech long folder can bend thick materials up to 3mm.

The perfect metal folding machine for 3m to 12mm in length, lengths that a press brake simply can’t produce. Long lengths can be achieved without extra additional add-on equipment. In addition, with a small footprint, this folding machine can fit in spaces a press brake can’t.

Production Speeds

With the Mac-Tech long metal bending machine, tool configuration times are greatly reduced since there are no punches or dies, making it easy for the operator to start the machine and obtain an excellent finished product. These characteristics make this machine ideal to produce many profiles in small batches. With the depth of work that this machine can achieve it opens the door to handling much larger plates. Positioning becomes an uncomplicated task since the large part of the plate is supported on trays and “inside” the machine which frees up the operator and reduces fatigue.

Regardless of material thickness, radius, angle, or sheet quality, there is no need to pre-set tools in a folding machine. Non-use of tools avoids maintenance costs and the purchase of new ones. The geometry of the clamping beam allows you to perform rounds, hems, ‘tear droop’ hem, or open hem without the tooling costs.

2 Machines in 1

The Mac-Tech long sheet metal bender comes standard with an automated cutting sheer. The flexibility to cut the entire length of the machine with a single piece of equipment reduces your overall cost per part. The two laminar slitting disks allow for smooth and burr-free cuts every time.

Just In Time Manufacturing

Need to produce a part in a hurry? With the simple CNC controller, simply draw out your measurements and you are ready to start running the job. The material development calculation is automatically performed, and the operator can begin prepping the next job.

Safety

As with any piece of equipment, operator safety is top of mind. The cost can be overwhelming with expensive safety lasers which do not prevent the Stefa long metal folding machine from being safe. The Mac-Tech long sheet bending machine ensures that the operator is always alerted to crushing and injury potential, with automatic safety alerts the machine does not allow automatic movements without the operator’s input first.

General

General

STANDARD FEATURES

  • Profile bend lengths of 4000mm to 12000 mm, up to 3mm material thickness
  • Rotational lower beam offering folding angles to 145°
  • Material backed gauge of 1070 mm stroke
  • 260 mm open height between top and bottom tools
  • Standard simple touch CNC control software is specifically designed for the long beam bending of cladding, roofing profiles, its easy to program and operate. Touch screen control makes your programs step-by-step allowing for simple repeatability
  • Clamping pressure in the standard simple touch controller has a double pressure switch which two defined pressures, 120 bar for normal operation, then 180 bar to close a hem (safe edge), or when folding any max thickness material
  • The longitudinal shear comes standing allowing you to make final trimming out of a folded sheet, up to 3 mm thick
  • Brushless motor for back gauge with encoder
  • Double switch foot pedal
  • Emergency stop “kick wire”
  • Safety operating speed 10 mm/sec

Optional

Optional

OPTIONAL FEATURES

  • Command CNC EliteBender – Raise the bar to a higher level with Command CNC EliteBender software. Enable your operators to quickly program parts; simple to complex. Connect the controller to the web for remote assistance anywhere, anytime.
  • Safety Laser – Increase the speed of production with finger laser protection. The laser descends without requiring a safety stop.
  • Tapered and servomotor for back gauge – Produce conical profiles for gutters add a servo motor on each finger to make conical cuts. Increase speed with high precision servomotors.
  • Cutting Line LCA1,5 – Cut sheets up to 1500mm of width with the cut line. Automatic production by electronic positioner and encoder. Add slitting discs for longitudinal cutting and roller unit for pre-straitening of sheet metal.
  • Manual decoiler DC6 – Welded structure decoiler with 6 ton capacity. The decoiler can expand manually the mandrel and regulate speed with a brake.

Contact Us

Product Form

Name(Required)
Address(Required)
Confirm you are real(Required)
Select the 'I'm a real person' and complete the Google Captcha to send the form.