"Great little machine!"


Jon Murphy (Operations Manager at H&H Trailers, LLC), describing the Ermak Power Bend Falcon

"Just wanted to thank you and Cole for doing a great job installing our shear blades yesterday.  I will keep Mac-Tech in mind on any future maintenance needs that I may have."


Jim Teska (QC Manager at Classic Sheet Metal)

"Just wanted to drop you a line and thank you for the quick response and repair to our machine .

We appreciate the fine service!! Machine is running great!"

Joe Krippelz Sr., President. Jake's Inc.

“We had talked about this technology in the past but, frankly, we were skeptical of its fit at CSG. Mac-Tech was competent and prompt with response times, qualities that meshed well with our own core business values. The high part accuracies we achieved with the Ermak press brakes also demonstrated to us Ermaksan’s ability to design and construct a precision machine frame with tier one components.”


- John Driscoll, Container Service Group

“Prior to the laser we fabricated all our components on the turret press or on manual machines. The operations required hours of cleanup. Punch-formed parts and louvers are reserved for our existing turret punches but the laser has taken on 90 percent of the workload with minimal cleanup. We’ve been able to reclaim that time and move our manpower from the hand labor it took to make and clean parts to assembly work instead. As a result we’ve increased output, stepped up assembly time and cut fabrication time by weeks for some components.”


- John Driscoll, Container Service Group

The entire management staff here at ADA, would like to thank you and Mac-Tech for your quality customer service that you have shown during this purchase. You are showing us, exactly what we try to provide for our customer every day."


Jeff Baumann (ADA)

"This laser is cheaper to operate than my hot tub!"



- Owner (Container Service Group), on the Ermaksan Fibermak Gen 3.

On-Site Mobil Oil Filtration

Purelube 20 GPM Absolute Filtration Oil Cart


Oil changes are a necessary maintenance procedure. It is recommended to filter oil within the first 1000 hours of a new machine. Oil drums often times have sediment in the bottom that can cause hydraulic valve issues, which means all new barrel oil should be filtered when filling and changing the machine fluids. But because it means stopping your whole operation, oil changes are often neglected, which causes permenant issues with the machines and leads to even costlier and more time consuming service.  

The Liquidynamics Purelube 20 GPM Absolute Filtration Cart allows Mac-Tech's technicians to do oil changes in a fraction of the time it would take our customers to do it, and even faster than we did them before! To ensure efficient filtering, Liquidynamics uses 5 layer, high performance filter elements, which have exceptionally high contaminant holding capacities while also achieving Beta ratios exceeding 200. This ensures reaching your target ISO fluid cleanliness levels while maintaining high fluid quality and superior system longevity. 


Mac-Tech provides oil changes as part of our Preventative Maintenance Package. For more information and pricing, call us at 888-MAC-9555 or fill out one of our Contact Forms.