"Great little machine!"


Jon Murphy (Operations Manager at H&H Trailers, LLC), describing the Ermak Power Bend Falcon

“We had talked about this technology in the past but, frankly, we were skeptical of its fit at CSG. Mac-Tech was competent and prompt with response times, qualities that meshed well with our own core business values. The high part accuracies we achieved with the Ermak press brakes also demonstrated to us Ermaksan’s ability to design and construct a precision machine frame with tier one components.”


- John Driscoll, Container Service Group

The entire management staff here at ADA, would like to thank you and Mac-Tech for your quality customer service that you have shown during this purchase. You are showing us, exactly what we try to provide for our customer every day."


Jeff Baumann (ADA)

"Just wanted to drop you a line and thank you for the quick response and repair to our machine .

We appreciate the fine service!! Machine is running great!"

Joe Krippelz Sr., President. Jake's Inc.

"This laser is cheaper to operate than my hot tub!"



- Owner (Container Service Group), on the Ermaksan Fibermak Gen 3.

“Prior to the laser we fabricated all our components on the turret press or on manual machines. The operations required hours of cleanup. Punch-formed parts and louvers are reserved for our existing turret punches but the laser has taken on 90 percent of the workload with minimal cleanup. We’ve been able to reclaim that time and move our manpower from the hand labor it took to make and clean parts to assembly work instead. As a result we’ve increased output, stepped up assembly time and cut fabrication time by weeks for some components.”


- John Driscoll, Container Service Group

"Just wanted to thank you and Cole for doing a great job installing our shear blades yesterday.  I will keep Mac-Tech in mind on any future maintenance needs that I may have."


Jim Teska (QC Manager at Classic Sheet Metal)

Installation & Training

CNC Press Brake Installation & Training

Get the best out of your new investment with Mac-Tech's expert Installation & Training, provided by our specially-trained Technicians.  We will install and train on any machine, whether you bought it from us or someone else, including:


  • Press Brakes
  • Ironworkers
  • Saws
  • Shears
  • Waterjets
  • Punch Presses
  • CNC Conrtollers
  • and more!

Mac-Tech offers the best On-Site Training in the Midwest, run by specially-contracted expert trainers.  With over 80 years of experience in metal fabrication machines, we believe in sharing the extensive knowledge we've collected over the years and helping you run your business as efficiently as possible.



For more information on Installations, or on our next Open Demonstration & Training Event,

call 1-888-MAC-9555 or submit an Information Request Form today!